inFORM Decisions Information Portal

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

===== Configuring Printer Drivers =====

Prior to configuring the software, the communication configuration needs to
be established between the iSeries and the Toshiba eStudio Printer.
The most reliable method for accomplishing this task is to create a remote
printer device. The format of the command is out lined below:

<html><pre>
CRTDEVPRT DEVD(printer_name) DEVCLS(*LAN) TYPE(3812) MODEL(1)
LANATTACH(*IP) PORT(9100) ATTACH(*DIRECT) ONLINE(*YES) FONT(11
*NONE) FORMFEED(*AUTOCUT) SEPDRAWER(*FILE) PRTERRMSG(*INQ)
MSGQ(*LIBL/QSYSOPR) ACTTMR(170) INACTTMR(*SEC15)
LINESPEED(19200) WORDLEN(8) PARITY(*NONE) STOPBITS(1)
TRANSFORM(*YES) MFRTYPMDL(*HP4) PPRSRC1(*LETTER)
PPRSRC2(*LETTER) ENVELOPE(*NUMBER10) ASCII899(*NO) IMGCFG(*NONE)
CHRID(*SYSVAL) RMTLOCNAME(IP_Adress) SYSDRVPGM(*HPPJLDRV)
</pre></html>

From the command above replace the printer name with your actual naming
convention for your printer. Also, in the last line of the command,
RMTLOCNAME(IP_Address), replace the value IP_Address the IP address
assigned to your Toshiba printer.